GeoVision GV-Hybrid LPR Camera 10R Скачать руководство пользователя страница 103

Страница: 103 / 146

Chapter 5 Advanced Applications

This chapter introduces more advanced applications.

5.1 Upgrading System Firmware

GeoVision periodically updates the latest firmware to the company website. You can update

your camera firmware through the Web interface or GV-IP Device Utility included in the

Software DVD.

Important Notes before You Start

Before you start updating the firmware, please read these important notes:

1. While the firmware is being updated, the power supply must not be interrupted.

WARNING:

The interruption of power supply during updating causes not only update

failures but also damages to your camera. In this case, please contact your sales

representative and send your device back to GeoVision for repair.

2. Do not turn the power off within 10 minutes after the firmware has been updated.

3. If you use GV-IP Device Utility for firmware upgrade, the computer used to upgrade

firmware must be under the same network as the GV-Hybrid LPR Camera 10R / GV-IP

LPR Camera 5R.

4. Stop monitoring the GV-Hybrid LPR Camera 10R / GV-IP LPR Camera 5R.

5. Stop all the remote connections including Center V2, VSM, ViewLog Server and

3GPP/RTSP.

6. Stop the connection to GV-System.

7. If firmware upgrade fails, you will need to restore the camera to its default settings. For

details, see

5.3 Restoring to Factory Default Settings

Содержание GV-Hybrid LPR Camera 10R



















































































































































Результаты поиска

Содержание GV-Hybrid LPR Camera 10R

Отзывы:

GeoVision GV-Hybrid LPR Camera 10R, Руководство пользователя, Страница: 103 / 146

Результаты поиска

Содержание GV-Hybrid LPR Camera 10R

Отзывы: