System Setup
27
8
5. B/W: Set to ON for B/W images and OFF for Color images.
6. DEFAULT: Return to day/night default setup.
7. RETURN: Return to previous status.
<Note>
•
When D/N are set to AUTO, the value will be automatically adjusted regarding
to the circumstances.
•
Using DC LENS from different manufacturers may result in switching
problems (unable to switch), you could adjust and operate according to
current environment (adjust DAY-NIGHT or NIGHT-DAY value in order to meet
the current environment).
•
Day Night ambiguity suppression:
Because the ICR filter of the camera switches according to the illumination
environment. The system in order to avoid the occurrence of ICR hunting issue,
as in some special environments, the Day/Night function may keep on switching
the ICR filter. If the ICR keeps on switching for over three times, the camera will
disable the Day/Night detection function. And the Day/Night detection function will
return to Auto after 30 min.
8.2.4 WHITE BALANCE Setup
WHITE BALANCE
WB MODE
RED GAIN
BLUE GAIN
PUSH AUTO
DEFAULT
RETURN
AWB
NA
NA
NA
ON
1. WB MODE: Five types of mode: AWB, ATW, INDOOR, OUTDOOR, PUSH AUTO,
and MANUAL (Default Setup: AWB).
2. RED GAIN/ BLUE GAIN operate only when WB MODE is set to MANUAL,
otherwise it is NA (Not Available).
3. When WB MODE is set to PUSH AUTO:
(1)
PUSH AUTO ON: Enable auto tracing white balance.
(2)
PUSH AUTO OFF: Depending on environment, disable auto tracing white
balance and record the current white balance value.
4. DEFAULT: Return to white balance default setup.
5. RETURN: Return to previous status.
Содержание GV-HD-SDI
Страница 4: ...2...
Страница 37: ...Specifications 35 9...