Introduction
7
1
1.5 Physical Description
To access the Default button, LED indicators and micro SD card slot, unscrew the screws
indicated below and then remove the outer shell of the camera.
Figure 1-1a: GV-FE Series
Figure 1-1b: GV-FER521
Note:
For GV-FER521, a silica gel bag is attached to the inside of the camera’s outer shell.
The silica gel loses effectiveness after you open the camera’s outer shell. To prevent the
lens from fogging up, it is highly recommended to replace the silica gel bag every time you
open the camera. To replace the silica gel bag, use the supplied adhesive tape to attach a
new silica gel bag and fasten the camera’s outer shell within 2 minutes of opening the silica
gel bag package.
You can now access the Load Default button, LED indicators, and the micro SD card slot.
6
5
7
8
2
4
3
1
Figure 1-2a: GV-FE Series
