Administrator Mode
4
4.2 I/O Control
After installing the I/O device, you need to enable the I/O settings on the device.
4.2.1 Input Setting
To activate the sensor input, select
Enable
.
Figure 4-11
Normal State:
You can set the input state to trigger actions by selecting
Open Circuit
(N/O)
or
Grounded Circuit (N/C)
.
Latch Mode:
Enable this option to have a momentary output alarm.
Trigger digital output relay:
When this option is enabled, the output will be triggered
once the input is activated.
Record:
Enable this option to start recording when the input is triggered.
Send Video to Center V2:
Enable this option to send the images to Center V2 when the
input is triggered.
Click
Apply
to save the settings. Start monitoring for the function to take effect, see
4.4.
Monitoring
.
Note:
To activate the input settings based on a schedule, see
4.5.1 I/O Monitor
.
45
