GeoVision 88-VD37000-0020 Скачать руководство пользователя страница 2

Страница: 2 / 331

Under the copyright laws, this manual may not be copied, in whole or in part,

without the written consent of GeoVision.

Every effort has been made to ensure that the information in this manual is

accurate. GeoVision, Inc. makes no expressed or implied warranty of any

kind and assumes no responsibility for errors or omissions. No liability is

assumed for incidental or consequential damages arising from the use of

the information or products contained herein. Features and specifications

are subject to change without notice.

Note that memory card slot (local

storage) is not supported for Argentina.

GeoVision, Inc.

9F, No. 246, Sec. 1, Neihu Rd.,

Neihu District, Taipei, Taiwan

Tel: +886-2-8797-8377

Fax: +886-2-8797-8335

http://www.geovision.com.tw

Trademarks used in this manual:

GeoVision

, the

GeoVision

logo and GV

series products

are trademarks of GeoVision, Inc.

Windows

is the

registered trademarks of Microsoft Corporation.

February 2017

Содержание 88-VD37000-0020












































































































































































































































































































































Результаты поиска

Содержание 88-VD37000-0020

Отзывы:

Бренды по названию

Популярные бренды

GeoVision 88-VD37000-0020, Руководство пользователя

Результаты поиска

Содержание 88-VD37000-0020

Отзывы:

Бренды по названию

Популярные бренды