8.
Thread the Ethernet cable through the PG21 conduit connector and the power box as
shown in No. 8,
Figure 1-26
. Then connect the cable to the camera. To waterproof the
cable, see
1.6 Waterproofing the Cable
.
9.
Rotate the plastic ring to secure the conduit connector to the power box. Screw in the
cap as shown in No. 9,
Figure 1-26
.
10. Screw the wall mount bracket to the power box as shown in No. 10,
Figure 1-26
.
Figure 1-26
11. Mount the bottom ring.
Figure 1-27
16