GeoVision 84-TDR2700-1F10 Скачать руководство пользователя страница 128

Страница: 128 / 165

Administrator Mode

3.5.1.7 Face Detection

The Face Detection function can detect for and capture face(s) to be sent to an FTP server.

Select the checkbox next to

Face

to enable and click

to configure.

Figure 3-37

1. Once enabled, define the detecti

y drawing a desired area on the image

o adjust the detection sensitivity.

repeated

the snapshot(s) captured.

ote:

The

Counting

feature is currently nonfunctional.

on area, either b

or select

Full Screen

next to

Detection Area

to set the entire image as detection area.

2. Configure the following functions as needed:



Detection Sensitivity:

Drag the slider t



Snapshot Mode:

Select

Intelligent Recognition

to set the maximum of

face snapshots under

Max. Same Thumbnail Image



Face Overlay:

Enable to include the camera’s OSD on

3. Under

Trigger Actions

, select

Upload Image (Original)

and/or

Upload Image (Face)

upload a snapshot of the entire image and/or a snapshot of the face detected,

respectively, upon face detection.

4. Follow

Step 6

3.5.1.1 Cross Line

115

Содержание 84-TDR2700-1F10






































































































































































Результаты поиска

Содержание 84-TDR2700-1F10

Отзывы:

GeoVision 84-TDR2700-1F10, Руководство пользователя, Страница: 128 / 165

Результаты поиска

Содержание 84-TDR2700-1F10

Отзывы: