Geotech 19656, Руководство пользователя

Страница: 9 / 18

PVT READING KIT FOR PC Manual 2015-02-25
5
Read-out kit for PC
3 Read-out kit for PC
Installation 3.1
Hardware installation 3.1.1
Connect the interface to a USB outlet of your computer and use the two crocodile clips for connection to
the piezometer.
Installing PVTLog 3.1.2
The computer will require a connection to the Internet during installation of the PVTLog software.

Copy the content of the software medium to the computer.

Connect the interface to a USB port on the PC.

Driver installation will start automatically. Wait until the message "New hardware is ready to use"
is showed in the computers lower right corner.

Run “PVTLogSetup.exe” and follow the prompts.

If Microsoft .NET Framework 4.0 or later is not installed on your computer, it will also be installed.

PVTLog is now ready for use.
Main page 3.2
When PVTLog starts for the first time some basic settings are made, so therefore it will take a little longer
to start. If PVT interface is connected, the text "PVT INTERFACE CONNECTED" will be shown in the
lower left corner of the program window.
Fig. 2: PVTLog Main page. If you connect a piezometer, identity and current values will be shown.
Piezometer reading 3.3
Read current pressure 3.3.1
Connect the piezometer. Enter the current air pressure if you want the correct compensated pressure to
be shown. Note that the air pressure unit is in hPa and the piezometer read out pressure is in mH
2
O.
If the piezometer carries any setup information, it will automatically be loaded and displayed. Please ob-
serve that the installation information is only stored locally on your computer in the directory