Geotech 19656, Руководство пользователя

Страница: 5 / 18

PVT READING KIT FOR PC Manual 2015-02-25
1
General Information
1 General Information
Foreword 1.1
This manual contains important information for the proper use of the PVT READING KIT FOR PC and the
PVTLog software for GEOTECH PVT piezometers. The content of this document reflects functionality as
implemented in software version 2.11. Please feel free to report bugs and suggest improvements (contact
information can be found in the end of the manual).
Read the manual carefully before you start operating the system. Also read the maintenance instructions
before performing any maintenance work. The warranty from Ingenjörsfirman Geotech AB is valid only if
the instructions in this manual are followed.
Always keep the manual by the equipment and replace it immediately if it should become wholly or par-
tially unusable. A new copy can always be ordered from Ingenjörsfirman Geotech AB.
Content 1.1.1
The information in this publication is on the basis of information that was available at the time that the
publication was written.
The information can change at any time. Ingenjörsfirman Geotech AB reserves the right to change or
update the content of the manual without prior notice.
Safety 1.2
The operator must be alert to potential hazards. The operator should also have the necessary training,
skills and tools to perform these functions properly.
The important safety messages in this manual are presented as follows:
Indicates a hazardous situation which, if not avoided, will result in death or serious injury.
Indicates a hazardous situation which, if not avoided, could result in death or serious injury.
Indicates a hazardous situation which, if not avoided, could result in minor or moderate injury.
This warning identifies important messages in this manual, e.g. information on risk for costly
damage. Carefully read the message and inform your colleagues.