Driver Feedback Settings
To enable the relay option in MyGeotab, prior to IOX installation:
1
Navigate to MyGeotab.
2
Select Vehicles, located in the navigation menu to the left.
3
Select the GO device.
4
Select the Driver Feedback tab.
5
For Driver identification reminder, click On and set the time limit using the slider.
Driver ID Relay
Requires Professional Installation: To install a Driver ID Relay in conjunction with the IOX-NFCREADER, please review the
instructions in the SPR-RELAYKIT Install document (
).
Incompatibility
The IOX-NFC
READER
cannot be used in conjunction with the IOX-HID.
Compliance
FCC: 2AAFQ-NFC1
This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device
may not cause harmful interference, and (2) this device must accept any interference received, including interference that
may cause undesired operation of the device.
Note:
The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to
this equipment. Unauthorized modification voids the user’s right to operate the equipment.
IC: 11140A-NFC1
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation of the device.
Copyright © Geotab Inc. 2015-2019 - All Rights Reserved | www.geotab.com | Rev 2.13 - 11/2019
® denotes a trademark of Geotab Inc., registered in Canada, the United States and other countries
5