GeoSIG Ltd.
GS_GSR_GCR_UserManual_V21.doc / 18.09.2009
Page 2
GSR / GCR / AS User Manual
2.1. Damage During Shipment
If requested at the time of order, all instruments can be insured prior to shipment. If you receive a
damaged shipment and shipping insurance was previously arranged you should:
•
Report the damage to your shipper immediately
•
Inform GeoSIG or your local representative immediately
•
Keep all packaging and shipping documents
a
Insurance claims may be void if the above procedure is not followed.
2.2. Warranty
GeoSIG Ltd. (hereafter GeoSIG) warrants hardware and software products against defects in
materials, workmanship and design for the defined period in the relevant contract or offer, starting
from date of shipment and 5 years parts and maintenance support commitment. If GeoSIG receives
notice of such defects during the warranty period, GeoSIG shall at its option either repair (at factory) or
replace free of charge hardware and software products that prove to be defective. If GeoSIG is
unable, within a reasonable time to repair or replace any instrument to a condition as warranted, buyer
shall be entitled to a refund of the purchase price upon return of the instrument to GeoSIG. 50 % of
freight charges on shipments of warranty repairs or replacements will be borne by GeoSIG (normally
one way freight).
Limitation of Warranty:
The foregoing guarantee shall not apply to defects resulting from:
•
Improper or inadequate maintenance by buyer
•
Buyer supplied software or interfacing
•
Unauthorised modification or misuse
•
Operation and storage outside of the environmental specifications of the instrument
or
•
Improper preparation and maintenance of site.
3. Description
3.1. Housing
The Instrument is housed in a weather-resistant, IP 65, cast aluminium housing with a hinged lid.
Information regarding the Instrument's date of manufacture, serial number, etc. is contained on the ID
label on the outside of the housing.
3.2. LCD
The alphanumeric display provides detailed information about the Instrument status, incoming signal,
date and time and warning/error messages. The information to be displayed is user programmable
and can be set via GeoDAS (see the GeoDAS manual).
3.3. LED's
AC
(
A
ctive
C
harge)
This green LED indicates that the recorder is in state of
A
ctive
C
harge to charge the battery. The
following 3 LED’s flash after switching on the Instrument.
