Geosense VWNPC-3000 Скачать руководство пользователя страница 8

Страница: 8 / 30

V1.4 March 15

4.3

Inspection

It is important to check all the equipment in the shipment as soon as possible after

taking delivery and well before installation is to be carried out. Check that all the

components detailed on the documents are included in the shipment. Check that the

equipment has not been physically damaged.

ALL

Geosense

NPC

3000 NATM Cells

carry a

unique

identification serial number

which is located on the cable close to the pressure sensor body and at the free end of

the cable. All are supplied with individual calibration sheets that include their serial

numbers and these will shipped with the cells.

Calibration Sheets contain VITAL information about the NATM

Cell. They MUST be stored in a safe place. Only copies

should be taken to site.

(Continued on page 9)

4.0

DELIVERY

This section should be read by all users of

Geosense

NPC

3000 NATM Cells

4.2

Handling

Whilst they are a robust devices,

Geosense

NPC

3000 NATM Cells

are precision

measuring instruments. They and their associated equipment should always be

handled with care during transportation, storage and installation.

Once the shipment has been inspected ( see below ), it is recommended that cells

remain in their original packaging for storage or transportation.

Cable should also be handled with care. Do not allow it to be damaged by sharp

edges, rocks for example, and do not exert force on the cable as this my damage the

internal conductors and could render the installation useless.

4.1

Packaging

Geosense

NPC

3000 NATM Cells

are packed for transportation to site. Packaging

is suitably robust to allow normal handling by transportation companies.

Inappropriate handling techniques may cause damage to the packaging and the

enclosed equipment. The packaging should be carefully inspected upon delivery and

any damage MUST be reported to both the transportation company

Geosense

Содержание VWNPC-3000































Результаты поиска

Содержание VWNPC-3000

Отзывы:

Бренды по названию

Популярные бренды

Geosense VWNPC-3000, Инструкция по эксплуатации

Результаты поиска

Содержание VWNPC-3000

Отзывы:

Бренды по названию

Популярные бренды