22
Radio signal coverage
When doing the Radio signal coverage test, the position of the Android device is saved (if you gave
the app permission to access the GPS data) and a security token number identifies each test.
If the Gateway and/or the Android device are not connected to the Internet during the test, the
online test will fail and you will need to perform an
Offline test
. In this mode, however, the results
of the test cannot be displayed on the Android device. The security token number identifies each
test. Write down the token number along with a description of where and under what conditions
the test was taken. Check the results of the coverage test on the Gateway web interface by going to
Network
, then
Signal coverage test map
, and then
Download all tests of this network
.
