13
Powering the laser node
The WI-SOS 480 Laser Distance Meter Node is shipped closed and may not have batteries installed.
In order to initialise it, you should follow these steps:
1.
Open the laser node (using a 2.5 mm Allen wrench)
2.
Insert
C-type batteries
in the battery holders. One or two batteries can be placed (the more
batteries placed, the longer life the logger will have). Polarity is indicated;
Please note that the device has reverse battery protection but it is not safe to keep batteries
reversed in the laser node for a long time.
Warning: Risk of explosion if incorrect batteries are used. Dispose of batteries according to
instructions. This equipment should be installed in restricted access areas.
3.
The logger can be powered with batteries and with external power, but there is no switch
available to select battery or external power.
Node information
