SVC-821 ASSEMBLY INSTRUCTION
REV:EN301013-03
Copyright 2006-2015 © Geoscanners AB
5
1.
Insert the computer holder (6) into the
T-connector on the handle (3) and secure it in
position with one of the quick release pins (7).
System Assembly
2. Position the assembled cart over the antenna
and use the four long thumb screws (8) to
secure it in position.
3. With the supplied thumbscrews (8) secure
your radar control unit Akula 9000 to the back
frame. Please note that the On/Off button and
the USB output need to face up.
4.
The survey cart is now assembled. Now only
the control cable, USB cable and the encoder
need to be conected to complete the radar
configuration.
Connect the survey wheel cable to the encoder
on the back axis, then connect the other end to
the GPR control unit Akula 9000.
