GEORGE FISCHER SIGNET 9030 Intelek-Pro, Инструкция по эксплуатации

Страница: 5 / 42

Chapter 1
Introduction
1.1 Introduction
Your new +GF+ SIGNET 9030 Intelek-Pro pH
Controller has been specifically designed for pH
measurement process control applications. The
controller's compact 1/4 DIN enclosure (front) is
NEMA 4X/IP65 rated and ideal for installation
into instrumentation panels with limited space.
Modular "plug-in" input/output option cards allow
you to customize your pH controller to your
system's requirements. The controller's unique
"slide-out" chassis design makes option installation
fast and simple. Smart self-configuring
microprocessor based circuitry automatically
inventories installed options during power-up,
allowing you to upgrade your system in seconds
without the need for additional equipment.
The unit's front panel features a highly visible
4.5-digit (seven segment) and 8-digit (alphanu-
meric) liquid crystal display with adjustable con-
trast. Active pH, mV, temperature in
°
C, and
alarm relay status information is quickly accessed
at a glance. During calibration the user is
prompted with clear step-by-step instructions on the
unit's front panel display.
The +GF+ SIGNET 9030 Intelek-Pro pH Controller
is fully compatible with all +GF+ SIGNET pH
sensor products, yet also accepts other analog
inputs, such as 4 to 20 mA or 0 to 5 VDC etc.
1
The technical data given in
this publication is for general
information purposes only. It
implies no warranty of any
kind.