Geometrics G-822A, Руководство по эксплуатации

Страница: 45 / 62

Geometrics, Inc. G-822/G-823 Magnetometer Manual
39
<F7> = Raise the magnetometer full scale coefficient in the graphics display
window. This key only affects the Mag channels (not gradient).
<Alt F6> =
Lower the Grad full scale coefficient in the graphics display window. This
key only affects the Grad channels (not magnetometer).
<Alt F7> =
Raise the Grad full scale coefficient in the graphics display window. This
key only affects the Grad channels (not magnetometer).
<F8> =
Clear next graphics screen and jump to it.
<F9> =
Clear Break, Frame, and Parity errors in the Com port status bar (text
display screen only).
<ALT F9>= Auto adjust to incoming baud rate and clear errors.
<F10> =
Toggle logging to disk.
<Esc> =
Exit to text mode (if in graphics display mode). Exit to DOS (if text mode
and not logging to disk).
Displaying Analog Channels
When in graphics display mode [F5] up to six analog channels may be enabled by typing
<CTRL A>. This will activate a series of questions to format the analog data for display:
Display Channel Number [0-5]:
Selects one of six display channels. Any channel can be selected. The default number is
the first unused display channel. If a channel currently in use is selected all subsequent
menu items will have their default values set to the current values. This makes it easy to
modify the format of a channel currently being plotted by simply pressing <enter> until
the parameter to modify is reached.
Display channel ON/OFF [0/1]:
Type '0' to turn a channel off. No further menu parameters will follow and the channel
will stop plotting. Type '1' to turn the display channel on or just <ENTER>, which
defaults to on.