Geokon 8020-42, Руководство по установке, Страница: 6 / 13

2
2. CONNECTIONS
Connector
Position
Signal
Name
Signal
Description
Type Level (typ.)
1 T Temperature Proportional Voltage Output 0 – 5 VDC
2 F1 Vibrating Wire Gage Frequency Output 200mv(pp)
3 EX Swept Frequency
Thermistor Excitation Input 5V CMOS
0-5VDC (max)
4 +12V +12V Power Supply Power Input 5.5 – 15.0 VDC
(+12V nominal)
5 GND Ground Power Input 0V
6 T+
3k
Ω
@ 25
°
C Ther input
Input 0 – 5 VDC (max)
7 T-
3k
Ω
@ 25
°
C Thermistor – input
Input 0 – 5 VDC (max)
8 C+ Vibrating wire Gage Coil + Input / Output 1mv(pp) / 4v(pk)
9 C- Vibrating wire Gage Coil - Input / Output 1mv(pp) / 4v(pk)
10 ENABLE Enable (Micro-10 configuration) Input 5V CMOS
11 CLOCK Clock (Micro-10 configuration)
Enable (Generic Datalogger configuration) Input 5V CMOS
12 F2 Vibrating Wire Gage Frequency Output
5V(pp) @ 50
Ω
Table 1 - Connector/Signal Description
NOTE: Because the 8020-42 requires each vibrating wire gage to have its own pair of twisted
leads, the 8020-42 is not compatible with Geokon models 4900 (VW Load Cell) and 4350-3
(Biaxial Stressmeter).