G-105 User Manual Document: G-105-01
------------------------------------------------------------------------------------------------------------------------------------------------
40
d
、
In above drawing, the coordinates for TV1 and TV2 are as follows:
TV1 coordinate for Top Left corner=(0, 586)
,
Top Right corner=(366, 216)
TV2 coordinate for Top Left corner=(815, 635)
,
Top Right corner=(447, 286)
Please pay attention to the display direction of the TV
e
、
After the video wall is created, user can use [Ratio] and [Position] function to adjust aspect ratio and
final image position freely.
10.3 Collect coordinates from photo
User can also take picture of the LCD array and put this photo into a 1920x1080 coordinates system
and collect 8 points of the coordinates for 4x LCD, then input these numbers into G-105. Below are the
processes:
The photo shall be corrected without distortion. If distortion happens, user can use [RealWorld
Paint] freeware to correction image distortion in advance.
Use Microsoft Picture Manager to trim the edge of the display area or directly use [Paint] software
to trim the image.
Resize to 1920x1080 image resolution in JPG or PNG format.
To view this photo file in Microsoft “Paint” and user can click mouse to capture the coordinates.
Adobe PhotoShop is also convenient software to capture the coordinates for cropping area.
10.4 Upload coordinates via OSD menu
After collect coordinates for all LCD, user can upload the coordinated into G-105 though OSD.
TV1
TV2
Figure A