Trio II Touchscreen
.
User manual
home screen
10
11
Energy Now
The
Energy now
screen is divided in
half, with the left side being about
Electricity
consumption now and
the right about
Gas
consumption.
Depending on your smart meter
configuration, only the available
energy types will be shown - the
gas flame will not be shown if
you do not have a gas smart meter,
for example.
This is the default screen shown
when the monitor has started
up, when the
t
button has been
pressed or when the monitor has
not been used for a period of time.
Pressing the
w
button will change
the values from being shown in
cost as £/hr and power as kW.
Electricity (left)
The dial on the left (only available
when you have an electricity smart
meter) shows the current rate of
energy use for your home.
As your home uses more or less
energy, the dial will move up
and down.
The dial is divided into three zones
- green, amber and red. As the dial
moves between the zones, the
colour of the button on the top of
the display will change to match.
This means you can quickly see
if your home is using a little or a
lot of electricity from a distance
or at times when the screen has
dimmed or turned off overnight.
The current rate of consumption
can be shown in cost as
£/hr
(default) or energy as
kW
.
Gas (right)
The gas flame indicates the recent
consumption rate of gas for the
home (where available). The usage
readings are taken every half
an hour.
As more gas is consumed, the blue
flame will increase in size.
Due to readings being taken every
half an hour, the flame shows
recent gas consumption and may
not show when gas is no longer
being consumed.