Geo Knight Digital Combo DC16, Руководство пользователя

Страница: 14 / 30

14
The plate attachment allows
the operator to press down
inside a dish or other indented
object. Here are some tips for
using the plate attachment:
Use the large T-Shirt flat
bottom table.
Place the 3-sided aluminum
tray on top of the T-Shirt
table. This will protect the
main T-Shirt silicone pad
from being cut into by the
plate’s bottom edges.
Plate the black circular silicone pad on the tray. Center the pad so that
it is directly underneath the plate heater block attachment when swung
over. Make sure it lines up directly under the plate heat platen. Then
peel the backing off the circular black silicone pad and permanently
stick it to the tray.
The purpose of the black circular pad is to automatically center the plate
under the heat platen. It also provides cushioning when pressing plates.
Set the clamping pressure of the press so the black pad is compressed to
50% its height. Pressing heavier may risk breaking certain fragile style
plates.
Lay the 1/8” green circular pad on top of the transfer paper in the plate.
How to use the Plate Attachment
Pressing Ceramic Tile
To press ceramic tile, use the standard T-Shirt heat platen and bottom
table. Lay the 1/2” White Nomex Felt padding on top of the black
silicone pad. Then lay the transfer paper face-up, and the tile face-down
into the image. Press the tile from the back side, firmly. This wraps the
transfer paper nicely around the radius of the tile.