geo-FENNEL FL 270VA TRACKING, Руководство пользователя

Страница: 36 / 88

36
EN
VIBRATION-WIND-SECURITY FUNCTION (V-W-S)
Press button to activate the V-W-S. The V-W-S LED is illuminted and the TILT LED starts flashing.
When the V-W-S LED and the TILT LED are both illuminated the V-W-S function is activated.
The V-W-S function automatically activates the TILT function. This function allows continuous operation
during periods of vibration and wind. If a significant movement occurs the laser stops rotating and the
TILT LED and the laser beam start flashing. Press the V-W-S button to cancel.
Press the V-W-S button once more for re-activation.
SCANNING MODE
Press button to select the scanning function. The scan angle is 180°.
Press button to change the scan angle:
180° -> 90° -> 45°-> 10° -> 45° -> 90° -> 180°.
Press button to orientate the scan line in a clockwise direction and button for anticlockwise.
Press button to quit the scanning function.
TILT ALARM FUNCTION
After POWER ON the laser automatically activates the TILT function. The TILT LED is flashing during the
activation procedure. When it is completed (after 90 sec. approx.) the LED is illuminated.
If the laser is disturbed the rotation stops and the laser beam and TILT LED will flash.The laser will not
re-level automatically.
If required the self-levelling procedure can be re-activated by pressing button .
To quit the TILT function press button .
If the laser is disturbed due to a positional change of the tripod it will automatically self-level itself
(within the self-levelling range of 5°), a height offset can occur. This will be avoided by using the TILT
function. The use of this function ensures that the laser is shut off even within the self-levelling range if
the laser is disturbed. Switch the unit on and wait until the self-levelling procedure is completed.