14
EN
DISPLAY INDICATION
BATTERY
When battery status indicator shows low battery power switch off the instrument, remove the screws
of the battery case, open the battery cover, remove the old battery and replace with a new one. Take
care to correct polartiy. Close cover and screw in the screws again.
Battery fully charged
Replace battery
GENERAL
The datalogger should be placed uprightly.
If istrument has been used in cold and humid environment place it up- rightly after measurement until
vaporizing the beads completely before reading the data.
Battery power can be saved is instrument is connected to a PC.
DATE / TIME Display of current date and time switching automatically every 10 sec.
MAX
Display of the maximum value measured during measurement
MIN
Display of the minimum value measured during measurement
REC
Indication that the instrument is in recording mode
FULL
Indication that the memorizer is full; recording process will stop
%RH
Indication that air humidity of the ambient air is measured
°C
Indication that temperature is measured in °C
°F
Indication that temperature is measured in °C
F
G
H
