geo-FENNEL CrossPointer5 SP, Руководство пользователя

Страница: 12 / 28

12
EN
ALKALINE BATTERIES
Open the battery compartment cover of the laser (4) and withdraw the alkaline battery box. Insert
4 x AA alkaline batteries (ensure correct polarity) and insert the battery box into the laser. Close the
battery compartment cover. If the ON/OFF LED flashes the batteries have to be exchanged (full set)
or the rechargeable battery has to be recharged.
RECHARGEABLE BATTERY (KIT)
Open the battery compartment cover of the laser
(4)
and insert the rechargeable Li-Ion battery. Close
the battery compartment cover. In order to charge the Li-Ion battery same has to be withdrawn
from the laser and it has to be recharged outside. When the Li-Ion battery has been recharged
insert it into the laser again.
The ON/OFF LED serves as battery status indication at the same time. It will start flashing when
the battery power becomes low.
The battery status will be shown as below:
· permanent red light = the rechargeable battery is
being charged at the moment
· permanent green light = the charging process
is completed now
The charger can also be used as permanent power supply.
The connection is made with the outer socket.
The rechargeable battery will note be charged over this connection!
POWER SUPPLY
B
Charging
LED
OPERATING ELEMENTS
C
5
1. ON/OFF knob (transport lock)
2. Keypad
3. Laser emitting window
4. Battery compartment cover
5. Hole for hanging position
6. Magnets
7. 1/4“ thread of the laser (bottom of the laser)
8. 1/4“ and 5/8“ thread of the mount
9. Slot for belt fixing
10. Fixing screw for the mount
6
1
2
3
4
9
10
3
6