background image

41

EN

INTENDED USE OF INSTRUMENT

The instrument emits a visible laser beam in order to carry out the following measuring tasks (depending on the instru-

ment): Setting up heights, horizontal and vertical planes, right angles.

SAFETY INSTRUCTIONS

·

Follow up the instructions given in the user manual. 

·

Do not stare into the beam. The laser beam can lead to eye injury. A direct look into the beam (even from greater 

distance) can cause damage to your eyes.

·

Do not aim the laser beam at persons or animals. 

·

The laser plane should be set up above the eye level of persons. 

·

Use the instrument for measuring jobs only.

·

Do not open the instrument housing. Repairs should be carried out by authorized workshops only. Please contact 

your local dealer.

·

Do not remove warning labels or safety instructions.

·

Keep the instrument away from children.

·

Do not use the instrument in explosive environment.

·

The user manual must always be kept with the instrument.

LASER CLASSIFICATION 

The instrument is a laser class 2 laser product according to DIN IEC 60825-1:2014.

It is allowed to use the unit without further safety precautions.

The eye protection is normally secured by aversion responses and the blink reflex.

The laser instrument is marked with class 2 warning labels.

Please note:

If you return instruments for repair / for adjustment to us please disconnect batteries or rechargeable batteries 
from the instrument - this is for safety reasons! 
Thank you.

Laser 

2

IEC 60825-1:2014

P ≤ 1 mW @ 635 - 670 nm

www.geo-fennel.de

GERMANY

Содержание 244045























Отзывы: