GEO Calibration 1000 SP, Руководство по эксплуатации

Страница: 8 / 26

5
Desiccant Installation
Locate Desiccant Canister
If indicating desiccant was included in your order, you should
check to ensure the desiccant has blue color throughout, with
no pink granules present.
Locate the Two Bungs on Rear
Make sure there are O-Rings inside of each bung.
Push Desiccant into Bungs
Make sure blue desiccant is on the left hand side.
Using gentle force, press the desiccant into the bungs.
Tighten and Attach Velcro Straps
Tightening the Velcro straps will complete the seal.
Make sure the desiccant is properly secured. It should feel and
look “tight,” as shown in the image provided.