background image

 

Remote Control Handling Instructions 

The remote control is a sensitive electronic device similar to a cellular telephone.   
Please follow the handling instructions below to avoid damage to or breakdown of 
the remote control. 

● 

Avoid storing or using the remote control in places that expose it to direct 
sunlight, places that have high humidity, places with extremely high 
temperatures (on top of the dashboard, etc.) or places with extremely low 
temperatures (leaving inside the vehicle while parked at ski resorts, etc.). 

● 

Do not store or use the remote control in places where it comes into direct 
contact with water. 

● 

Avoid exposure to strong impacts such as dropping it on the floor or hitting it 
against something hard.   

● 

If the remote control gets very dirty, use a cloth soaked in a watered-down, mild 
or neutral detergent, ring out the liquid solution and wipe down the remote 
control. (Never use benzene, thinner or chemically treated cloth/wipes.) 

● 

Avoid attaching a lot of keys to the key ring on the remote control, or sitting 
down while the remote control is in your pocket, as it can cause the remote 
control to deform and may result in damage. 

● 

While carrying the remote control, if the keys, etc., come into contact with a 
vehicle, it can lead to remote control breakdown or malfunction due an 
electrostatic discharge. Therefore, be careful of this risk during time periods 
when electrostatic discharges occur frequently. 

● 

Be sure that the battery cover and clasp are securely locked. Otherwise, if water 
accidently gets inside the internal part of the transmitter, it can cause 
breakdown.  

● 

Do not use in restricted areas such as on board airplanes or inside hospitals. 

● 

The remote control can negatively impact electronic and medical devices. 

● 

Be sure to follow the instructions and rules posted inside medical clinics or 
facilities regarding the use of electronic devices. 

● 

If the remote control is used on board airplanes, where usage is restricted, you 
may be subject to punishment due to airline rules and regulations. 

 
 

 

 

  Depending on the surroundings and how the remote control is held, the minimum 

distance required for the signal transmission varies. Generally, if the remote control is 
directed toward the vehicle when transmitting the signal, it should successfully transmit 
from far away. 

ADVICE 

Содержание GENUINE C930 V7 620


































Отзывы: