Pre-Ride Inspection
19
Perform a pre-ride inspection prior to every ride.
Front Brake Disc and Pads
Inspect the brake disc for wear, glazing and/or warping.
Inspect the brake pads to ensure the pad thickness is not
beyond the wear limit:
Wear Limit: 2mm
If the brake pad wears
entirely before
replacement,
damage to the disc and
loss of braking ability
can occur.
Rear Brake
The rear brake is a hydraulic disk type. Inspect the brake
system prior to each ride.
Properly functioning brake systems are vitally important to
your personal safety.
Check for fluid leaks, fluid level, brake pad wear, and rotor
condition. Also check lever free-play frequently.
Pull the brake lever lightly until you feel tension, then check
the lever free-play.
10
– 20mm
Rear Brake Lever Free-Play: 10 - 20mm
If the brake lever has no free-play or is too loose, there is a
potential brake system fault. Inspect brake system.
Содержание URBANO 50i
Страница 1: ...Owner s Manual ...
Страница 42: ...GENUINESCOOTERS COM 2700 W Grand Ave Chicago IL USA ...