Genuine Scooter Company URBANO 50i, Руководство пользователя

Страница: 19 / 42

Pre-Ride Inspection
18
Perform a pre-ride inspection prior to every ride.
Front Brake
The front brake is a hydraulic disk type. Inspect the brake
system prior to each ride.
Properly functioning brake systems are vitally important to
your personal safety.
Check for fluid leaks, fluid level, brake pad wear, and rotor
condition. Also check lever free-play frequently.
Pull the brake lever lightly until you feel tension, then check
the lever free-play.
10
– 20mm
Front Brake lever free-play: 10 - 20mm
If the brake lever has no free-play or is too loose, there is a
potential brake system fault. Inspect brake system
thoroughly.
Front Brake Fluid
Check all joints along the brake hose for any fluid leaking
from the joint or the brake cylinder. Leakage has occurred
if you see wet or oxidized fluid sludge.
Check brake fluid level
sight glass at base of
lever to determine brake
fluid level. Fluid should
be above the bottom half
of the sight glass.
Add brake fluid if
necessary.
Brake Fluid specification: DOT4