background image

Suggested Owners Manual Text for Auto-Dimming NVS

®

 Mirror with Z-Nav™ and HomeLink

®

 

Z-Nav™ Compass Display 

The NVS

 Mirror in your vehicle is also equipped with a Z-Nav™ Compass that shows 

the vehicle Compass heading in the Display Window using the 8 basic cardinal 
headings (N, NE, E, SE, etc.). 

Compass Function 

The Compass can be turned ON and OFF and will remember the last state when the 
ignition is cycled.  To turn the display feature ON/OFF: 
1.  Press and release the 

 button to turn the display feature OFF. 

2.  Press and release the 

 button again to turn the display back ON. 

Additional options can be set with press and hold sequences of the 

 button and are 

detailed below. 
 
There is a difference between magnetic north and true north.  The compass in the 
mirror can compensate for this difference when it knows the Magnetic Zone in which it is 
operating.  This is set either by the dealer or by 
the user.  The operating Zone Numbers for North 
America are shown in the figure to the right. 
 
To adjust the Zone setting: 
1.  Determine the desired Zone Number based 

upon your current location on the Zone Map. 

2.  Press and hold the 

 button for more than 3 

but less than 6 seconds, the current Zone 
Number will appear on the display. 

3.  Pressing and holding the 

 button again will 

cause the numbers to increment (Note: they 
will repeat …13, 14, 15, 1, 2, …). Releasing 
the button when the desired Zone Number 
appears on the display will set the new Zone. 

4.  Within about 5 seconds the compass will 

start displaying a compass heading again. 

 
There are some conditions that can cause changes to the vehicle magnets.  Items such 
as installing a ski rack or a CB antenna or even some body repair work on the vehicle 
can cause changes to the vehicle's magnetic field.  In these situations, the compass will 
need to be re-calibrated to quickly correct for these changes.  To re-calibrate the 
compass: 

1.  Press and hold the 

 button for more than 6 seconds.  When the compass memory 

is cleared a “C” will appear in the display. 

2.  To calibrate the compass, drive the vehicle is 2 complete circles at less than 5 MPH. 
 

Отзывы: