19
WEARING AND USING
PF3000P
Unfasten and remove the crown
pad to access the adjustment
straps. (Figure 14)
Adjust the length of the strap as
required ensuring that the four
locations pegs are within the
highlighted EN397 range of
adjustment (Figure 15).
This position will ensure correct
head ventilation for the
product.
Reposition the crown pad on the headband strap.
Re-attach headband in reverse order.
Refer to
Brow infill removal and installation
section on page
Re-attach face seal press fastener to the mating press fastener on the face seal.
Ensure the elastic strap is routed around the headband.
NOTE: Do not hold or suspend the respirator by the headband or face seal.
Figure 14
Figure 15
