GenTent StormBracer 20k Скачать руководство пользователя страница 4

 

 

Copyright  2016, GenTent® Safety Canopies, LLC. All rights reserved. Nottingham, NH, USA.  www.gentent.com  V4 

 

 

OPTION 2: REPLACE HANDLES WITH FOLDING HANDLES 

 

We have an optional folding handle kit that is a bolt in replacement to the fixed handles provided with your generator.  
These handles can be ordered with the GenTent 20k or ordered separately at 

www.gentent.com/products/mpaccflhdl

.   

This kit includes longer folding handles and installation hardware.  
 
To install these handles, remove the fixed handles from the generator.  There are four bolts that hold the handle in 
place.  Install the folding handles in the handle frame holes at the top and tighten.  The universal handles accommodate 
frame diameters from 1” to 1.5”.  The Generac frame is 1” diameter in this area. Be sure to tighten the handles until the 
handle flanges press against the frame. 

 

 

Содержание StormBracer 20k

Страница 1: ...ON Always grasp fiberglass rods firmly during installation to avoid the whipping motion that can occur when a bent fiberglass rod is mistakenly released CAUTION Avoid using GenTent in hurricane force winds above 60mph NOTE Should generator handles cause significant stretching of the elastic straps when extended it is advisable to release the elastics straps on the handle side of the generator befo...

Страница 2: ...ver the electrical panel align the hole and re install the bolt through the GTU the electrical panel and the frame Fig E Note that the two GTU s included will have holes that are opposite each other a Left and a Right or will have all four holes open Optionally drill a 5 32 hole through the frame where the bottom hole aligns with the frame and install the included 12x3 4 sheet screw Fig F shows a ...

Страница 3: ...ick detach pin You will need four 4 of these in the 5 16 x 2 size The handle is permanently connected to the frame with 4 carriage bolts Replace these bolts with either of the quick detach pin types above by unscrewing the existing bolt and simply sliding the quick detach pin into place then locking it with the clip pin as appropriate The GenTent should be initially installed with the handles off ...

Страница 4: ...k or ordered separately at www gentent com products mpaccflhdl This kit includes longer folding handles and installation hardware To install these handles remove the fixed handles from the generator There are four bolts that hold the handle in place Install the folding handles in the handle frame holes at the top and tighten The universal handles accommodate frame diameters from 1 to 1 5 The Gener...

Отзывы: