Copyright 2016, GenTent® Safety Canopies, LLC. All rights reserved. Nottingham, NH, USA. www.gentent.com V4
INSTALL GTUs
- Remove one of the top bolts which secures the electrical panel to the frame using the 5/16” socket and/or
open end wrenches (Fig D.)
- Position one GTU flush over the electrical panel, align the hole and re-install the bolt through the GTU, the
electrical panel and the frame (Fig E.)
- Note that the two GTU’s included will have holes that are opposite each other (a Left and a Right), or will
have all four holes open
- Optionally, drill a 5/32” hole through the frame where the bottom hole aligns with the frame and install the
included #12x3/4” sheet screw
- Fig. F shows a GenTent clamp subsequently installed onto the GTU.
Fig. D
Fig. E
Fig. F
