18
Back of wall installation
1.
Remove the plastic lid from the solenoid
box (1).
2. Allow a straight line cut 190mm (width)
x 120mm (height) in the wall 70mm to
110mm deep.
3. Connect the sensor cable from the
sensor plate (3) to the solenoid box (1)
and the battery / power transformer.
Before Installation
Before connecting water to the valve, ensure to
flush the line and remove all debris.
All fixtures must be installed using slim
compression fittings.
Working pressure must be between 150 and
450kPa.
WALL MOUNTED ELECTRONIC SENSOR PLATE
STS4500
No.
Description
Qty
01
Solenoid Box
1
02
Backing Plate
1
03
Sensor Plate
1
04
Cover Plate
1
*Use 350Kpa pressure reducing valve for extended life and better operation
