6
For optimum operational life, the installation of a PRV set to 350kPa is recommended
1.
Screw in the fixing bolts and tighten with
a screwdriver.
2. Connect the flexible hose. Care must
be taken to not twist the hose so that it
does not kink during assembly.
3. Assemble the flange to the base of the
tap then feed the flexible hose through
the pre-formed hole in the sink or basin.
Pre-formed hole size must be 35mm in
diameter
O – ring
4. From underneath the sink or basin, fix
rubber seal, fixing plate and fixing nuts
use socket set or tube spanner to clamp
the mixer onto the sink/ basin. Ensure
the tap set is firmly attached to the sink
or basin.
5. Flush the water supply pipework prior to
installation. Connect the flexible hose to
an isolating stop valve.
Important Information
Warranty may be void if damage to
internal components or spare part
occurs during service / maintenance.
Installation Instructions
PILLAR TAPS
GPT7500
