genourob ROTAM, Инструкция по эксплуатации

Страница: 13 / 27

05ROTAM FT02.008 C EN
EN
13
Entreprise certifiée ISO 13485 : 2016, NF EN ISO 13485 : 2016
par le LNE G'MED
You can access a few options, by doing a right-click on the graph. In the menu who shows up:

Copy , allows you to copy the graph in the clipboard.

Save as... , allows you to save the graph picture.

Layout... , allows you to configure the graph layout during an impression.

Print... , allows you to print the graph.

Show points values , allows you to show the value of a point by pointing the curve
with the cursor. (x,y) a p p e a r s , x represent the pressure and y le shifting.

Cancel zooms , allows you to cancel one by one the previous zooms.

Cancel all zooms , allows you to cancel all the previous zooms.

Reset scale , allows you to return to the default scale.
5.5. Configuration tab
The configuration tab gives access to you to the account management, of the printer and saves.
5.5.1 Configuration

Default practitioner name : e n t e r here the name of the practitioner who primarily use the
ROTAM.
It’s this name which is found in the tab « Patient record » when a new patient is
saved in the data.

Path of the data base : select a ROTAM data base.
By default the data base is placed in C:\Program Files\ROTAM Control\BDD\rotam.mdb.
H o w e v e r , here indicating another path,
it’s possible to work with another data base.

Default ROTAM test : allows you to specif y th e def ault test used in the tab
« Preparation ROTAM test » : 134, 150, 200, 250.

Curves number : allows you to configure the test numbers (99 maximum) whose curves will
automatically appear in the graph tab « Results ».
I
t’s mandatory to click the « validate the configuration » button to save and
apply the new settings.