Genmitsu 3018-MX3, Руководство пользователя

Страница: 23 / 53

Part 2: Mechanical installation
19
Step 10: Aluminum Workbench Installation
NO. NAME CODE QTY. BEFORE
Prepare
materials
1 Aluminum Workbench MX3-3 1
MX3-3
2 Base (from Step 9) 1
Tools 1 Allen wrench ( 5 mm) & Open end wrenches AFTER
Operation
Steps
1
Turn over the Base in the side of the Aluminum
workbench, move the base and make sure the nuts insert
into the three channels of the workbench.
10mm 10mm
2
Move the workbench in the middle of the base, keep the
Workbench from the left and right side for 10mm, Softly
clamp wrenches through Phenolic plate-F to a table.
Slowly rotate screw until plate just firmly contacts
wrenches. Tighten all the M6 bolts then remove clamps.
Check
Remind