7
TROUBLESHOOTING
WARNING
!
TO PREVENT SERIOUS INJURY FROM EQUIPMENT FAILURE:
Do not use damaged equipment. If abnormal noise, vibration, or excess
smoking occurs, have the problem corrected before further use.
Procedures not specifically explained in this manual must be performed
only by a qualified technician.
1. BEFORE EACH USE, inspect the
general condition of the charger. Check
for:
• loose hardware,
• cracked or broken parts,
• damaged electrical wiring or
cable insulation, and
• any other condition that may affect its
safe operation.
2. After Use, wipe external surfaces of the
tool with clean cloth.
Problem
Possible Causes
Probable Solutions
Parallel Kit doesn't
have power.
1. Device not plugged in
properly.
2. Circuit Breaker tripped.
3. Parallel Kit needs service.
1. Turn off generator and check
outlet connections for correct
positioning. Restart generator.
2. Turn off and unplug Parallel
Kit, reset Circuit Breaker, plug
in Parallel Kit and turn on.
3. Have Parallel Kit repaired.
Overload indicator
flashes.
Rated load capacity
exceeded.
Lower the number of items
plugged into the generator to
stay within the rated capacity.
Follow all safety precautions whenever diagnosing or servicing the
Parallel Kit.
