GENMAX GMGPW3000-H, Руководство пользователя

Страница: 18 / 36

16
SETUP
2 1
8
.
Connecting method of spray gun
:
a. Attach high pressure hose(D) to the
gun(A), pull back the quick-connect
collar(C) of hose and insert the spray
gun connector(B) and then release the
quick-connect collar(C). Once the hose
is connected, pull on the hose to make
sure it is firmly attached.
b. Attach high pressure hose(D) to the
gun(A),Connect the spray gun connector
(B) to the hose connector (C) and
tighten the threaded connector (C).
a.
A
B
C
D
A
B
C
D
b.
9. Remove the protective cap on the
Wand inlet. Insert the Wand into the
Spray Gun tip and tighten the nut firmly
by hand.
Wand
Spray Gun Tip
10
.
Attach the Nozzle to the Wand by
pulling back the quick connect collar and
pushing the Nozzle onto the end of the
Wand. Make sure the quick connect
collar locks the Nozzle in place.
Nozzle
Wand
Quick Connect
Collar
GENERAL INFORMATION:
Fuel Use fresh high-quality unleaded gasoline (minimum 87 octane),
containing up to 10% ethanol.
Do not use fuel with high ethanol content; E15 or E85.
Oil Engine oil: Use only SAE 10W-30, 0.6 Quart non-detergent oil
(supplied).
Pump Oil: The pump was lubricated and sealed at the factory, and is
maintenance free for the life of the product, under normal operation. Do
not attempt to change or add oil to the pump.