All artwork and images copyright
GEN
LED
®
AgiLight Industries Inc.
Use or reprinting prohibited unless explicitly approved by
GEN
LED
®
AgiLight Industries.
Page 6
GEN
LED
AgiLight
®
is a quality division of
GEN
LED Brands
™
| www.
GEN
LEDBrands.com/Home/AgiLight |
GEN
LED
AgiLight
®
| Innovative Signage Lighting
F I E L D C U T T I N G A N D S O L D E R I N G
3. Heat up the soldering iron till the temperature reaches 500-
550° F. Pre-tin the copper pads by placing the soldering iron
point onto one of the copper pads at the end of the
RibbonRayz, and then apply solder to the copper pad. The
max solder time per pad is 10 seconds. Repeat the same steps
and apply solder on the other copper pad.
1. Decide the length of the RibbonRayz you need and
find the closest cut point. Use masking tape and gently
tape down the RibbonRayz near the cut point to prevent
movements during soldering.
2. Cut RibbonRayz at the desired cut point
(cut point)
(cut point)
(masking tape)
(soldering iron)
(copper pad)
(solder)
