All artwork and images copyright
GEN
LED
®
AgiLight Industries Inc.
Use or reprinting prohibited unless explicitly approved by
GEN
LED
®
AgiLight Industries.
Page 4
GEN
LED
AgiLight
®
is a quality division of
GEN
LED Brands
™
| www.
GEN
LEDBrands.com/Home/AgiLight |
GEN
LED
AgiLight
®
| Innovative Signage Lighting
M O U N T I N G I P 2 0 R I B B O N R A Y Z
®
1. Clean the mountain surface free of dust and debris using
a wet cloth. For metal mounting surfaces use rubbing
alcohol (A) to wipe clean.
2. Remove the adhesive backing on the back of the RibbonRayz (D).
3. Every 12 inches place a silicone pad (B) over the
RibbonRayz (D) and use a pencil to mark where each
pilot hole will be drilled. DO NOT place the pad above
an LED. Place it as close to 12 inches as possible, while
not touching any LEDs.
(A)
(D)
(D)
(B)
*Minimum bend radius for RibbonRayz :
IP20: 0.5” (12.8 mm)
