Genki KBR-JK370A, Инструкция по эксплуатации

Страница: 7 / 11

7
7. FOLDING UP AND SETTING DOWN
NOTE: Ensure the Power Switch is in the 'OFF' position and the power cord is unplugged from the
electrical outlet.
FOLDING UP
：
⚫
Holding the rear end of deck directly by one hand, then lift the deck up until the Cylinder(A)
'pops' down into the locked position.
Note: Please check the Cylinder (A) 'pops' down into the locked position before moving the treadmill.
To prevent any injury, please make sure you have a firm hold when lifting up or setting down the deck.
SETTING DOWN:
⚫
Holding the rear end of deck by one hand, then use your foot to push the Cylinder(A) to set down
the deck of the treadmill.
Note: Do no stand under the deck when setting down the treadmill
8. USAGE OF SILICONE OIL
Pull up tightly of the running belt. Then put the silicone oil to
running board. Then start the machine to running 3 minutes
without loading. It is better to maintain like this every 30 hours
working of the machine. This can save lifetime of parts
properly.