PCI Sound Card
－
Sound Maker Value 4.1/5.1 Sound Card
5
LINE IN
This connector provides Line-in function.
MIC
This connector provides Microphone-in function.
F-Out
This connector provides Front sound source output, you can connect one
set of active speaker or headphone.
R-Out
This connector provides Rear sound source output, you can connect one set
of active speaker or headphone.
＊
C/LFE
This connector provides Center & Subwoofer (LFE) sound source output,
you can connect one set of active speaker.
（＊
Value 5.1 only
）
GAME/MIDI
The 15-pin female connector can be connected to any IBM PC compatible
joystick with a 15-pin D-shell connector and MIDI instrument.
CD-IN
There are two sets of pins, one for Mitsumi standard and the other for Sony
standard.
*A MIDI adapter is required to connect a MIDI instrument to the sound card. The MIDI adapter
can be purchased from your local computer store and is connected to the MIDI/GAME port.
B. Drivers Setup
Auto Run
Auto Run for Windows® 98 / Me / 2000 / XP / NT4.0,
1.
Insert the Multimedia Software CD-ROM into your CD-ROM drive.
2.
Click “Sound Maker Value 4.1 ” or “Sound Maker Value 5.1 ” button after entering software control
panel.
3.
Click “Install Device Driver and Applications” button.The wizard will lead you to finish all the
installation.
If Auto Run can’t be used with your computer, please refer to each Windows as follows,
Installing the Sound Card Driver under Windows
®
98/98SE
1. After hardware installation has been finished, power up your computer and wait for Windows
®
95/98/98SE to boot up.
2. The message box will show “Add New Hardware Wizard” and “This Wizard searches for new
drivers for PCI Multimedia Audio Device”. Click “
Cancel
”.
3. Insert the
Multimedia Software
CD-ROM into your CD-ROM drive or DVD-ROM drive.
4. Click “
Start
” at Windows bottom left corner.
5. Click “
Run
”.
6. Key in the drive and path for drivers/application installation program; for example,
“
D:\SMVALUE4.1\SETUP.EXE
” or “
D:\SMVALUE5.1\SETUP.EXE
”. (If your CD-ROM drive
or DVD-ROM drive is D)
7. Click “
OK
” to start the applications/driver installation procedure, and follow the on-screen
instructions to finish the installation.
8. When all the application software has been installed, please restart your computer.
9. Your system will install device drivers automatically.
Installing the Sound Card Driver under Windows
®
Me
1. After hardware installation has been finished, power up your computer and wait for Windows
®
Me
to boot up.