English
-30-
To cancel the self-timer during operation, press the shutter button halfway.
The table below will help you choose the appropriate self-timer mode:
Self-timer mode
Description
[
10s
] 10 sec.
The image is captured about 10 seconds after the shutter
button is pressed.
[
2s
] 2 sec.
The image is captured about 2 seconds after the shutter
button is pressed.
[
10+2s
] 10+2 sec.
One image is captured about 10 seconds after the
shutter button is pressed, and the other image is
captured again after 2 seconds. This is convenient when
capturing group images in succession.
Exposure Compensation/Backlight Correction
Images can be captured with the overall screen intentionally made brighter or darker.
These settings are used when a suitable brightness (exposure) cannot otherwise be
obtained in circumstance where the difference in brightness between the subject and
the background (the contrast) is large, or when the subject that you want to
photograph is very small within the screen. Exposure can be set in 0.3 EV units.
1. Slide the mode switch to [
] and press the
button.
Each press of the
button displays the
setting in the order of [Blank], [
] Backlight
Correction, and [
] Exposure
Compensation.
2. Set the exposure value with the
/
buttons.
Press the
button to increase the value.
Press the
button to decrease the value.
The setting range of the exposure
compensation is as follows.
-2.0, -1.7, -1.3, -1.0, -0.7, -0.3, 0, +0.3, +0.7,
+1.0, +1.3, +1.7, +2.0
Press the
button to confirm the setting.
The larger the value, the brighter the image.
The smaller the value, the darker the image.
The set value is displayed on the screen.
