English
-47-
Single: Sets DPOF for each individual image.
All: Sets DPOF for all images at once.
6. Select [Print Num.] with the
/
buttons, and press the
SET
button.
This displays the number of prints setting screen.
7. Set the number of prints with the
/
buttons, and press the
SET
button.
You can set up to 9 prints for each image.
8. Select [Date] with the /
buttons, and press the
SET
button.
The date setting screen appears.
9. Select date to [On] or [Off] with the
/
buttons, and press the
SET
button.
On: The date of the photograph will also be printed.
Off: The date of the photograph will not be printed.
10. Select [Print Enable] with the
/
buttons, and press the
SET
button.
11. Select [Execute] with the
/
buttons, and press the
SET
button.
This creates a file containing the DPOF information, and when the operation
is finished, the screen returns to the playback mode.
NOTE
The date that is printed on the photo is the date set on the camera. To print the correct date
on the photo, set the date on the camera before you photograph the image. Refer to the
section in this manual titled
“Setting the Date and Time”
for further details.
Before you perform the DPOF settings on your camera, always remember to copy your
images from the internal memory to an SD card first.
DPOF function is only activated when an SD card is inserted into the camera and saved
images captured by this camera.
