English
37
If the camera is idle, re-activate the camera by pressing
button or switch the mode dial.
If the camera has powered-off you must turn the camera on again by pressing the
button. The table (above) shows the default time settings for idle, and power-off. To change
the power saving interval, first press the
button. Then select the power-off interval you
prefer by using the
/
button and press
OK
.
Reset to default
If you wish to restore all camera settings to their original status, select this option and then
press the
button. Select [Yes] by using the
/
button and then press
OK
.
The table below shows the default setting for each item.
Item
Description
Image size
2048x1536 pixels
Image quality
Fine
Flash
Auto
LCD brightness
0
Quick view
On
White balance
Auto
EV compensation
0.0
Slide show delay
3 seconds
Auto power off
3 minutes
Beep
On
Date type
You can select the date type that is imprinted on your image. To set the date type, first press
the
button. Then select one date type you prefer by using the
/
button and
press
OK
.