Genius IPCAM SECURE300W - V 1.0, Руководство пользователя

Страница: 42 / 107

IPCam SECURE300W User’s Manual
KYE Systems Corp. 41
network configuration. Select Enable from the option
and enter the desired port number in the following box.
By default, port 80 (Web server port) is open. If these
ports are available for use, you DO NOT have to open a
second port and can proceed to the next section. If port
80 is not available (for example, if you are already using
port 80 to run a Web server or your ISP blocks access on
port 80*) you MUST open a second port and designate a
new Web server port (800, 801, 802,…etc)
Please note that some ISPs block traffic on commonly
used ports like port 80 to disallow consumers from
putting a server on their network. Be sure to check with
your ISP so that you can open the appropriate ports
accordingly. If your ISP does not pass traffic on port 80,
you will need to change the Web server port the camera
uses from 80 to something else, like 800. If you are
behind a residential gateway, you will need to open a
corresponding port on your gateway as well. Not all
gateways are the same, please refer to your gateway’s
user’s manual for specific instructions on how to forward
ports.
•
UPnP : The built-in UPnP support allows computers
running Windows® XP/Me to recognize the IPCam
SECURE300W and automatically add it to your network.
The IPCam SECURE300W can be instantly accessed and
viewed from “My Network Places” as a device on the
network. You can configure the IPCam SECURE300W
directly. Check the
Enable option to enable the function
of your camera.