GE-VX INSTALLATION
GE-VX
Section B-9
Mounting
-
The enclosure must be mounted in a location that will allow the cover to be
completely opened right up against the wall.
-
Fasten the four brackets to the four mounting holes on the back of the enclosure,
using the four screws provided with the brackets.
-
Then mount the enclosure on the wall by inserting screws through the brackets’
adjustment slots, into the wall. Make sure to position the enclosure so that all wires
extend out of the bottom section of the enclosure.
-
The bracket slots also serve to adjust the position of the GE-VX.
-
Once you have adjusted the controller position, tighten the four mounting screws.
FIGURE NO. 1 Mounting Position and Devices
www.monitrol.com
