background image

ENGLISH

Genius Car Alarm

www.geniuscaralarm.com

18

Genius Car Alarms 

www.alarmasgenius.com 

5

 

 

Electronic siren 

Install the siren under the hood, you should  put it in a place away from heat and water damage, 

while driving through deep puddles or water may be splashed causing damage to the siren, lock it 

in a position that water does not damage . If you wash your vehicle engine, protect the siren with a 

plastic bag to prevent damage. Damage caused by water or heat are not covered by warranty. 

Blink Light 

When the siren is sounding, the lights of the vehicle will blink simultaneously. The lights will also 

blink when arming and disarming the alarm system. 

 

Codes of the Lights blink 

 

This is a visual indicator of the state of the system of alarm. 

1 Flash  Armed 

2 Flash  Disarmed 

3 Flash  Trunk or Hood opened in armed 

4 Flash  When Disarmed indicates that the alarm was trigger. 

 

Sounds Siren 

 

This is a sonorous indicator of the state of the system of alarm. 

1 Sound  Armed 

Sounds 

Disarmed 

Sounds 

Trunk or Hood opened in armed 

Sounds 

When Disarmed indicates that the alarm was trigger. 

 

Installation of the warning LED of the board 

 

Locate it in a visible place in the board, the LED illuminates indicating that the vehicle has alarm 

system. Indications of the state of the alarm by means of the LED of the board: 

Slow flash 

Armed system 

Quick Flash  

Rearming automatically, countdown of 90 seconds 

LED Off 

Unarmed system and ignition in ON 

1 Flash - 1 Pause  Alarm Trigger by Door, Trunk or Hood 

2 Flash - 1 Pause  Alarm Trigger by Shock sensor. 

3 Flash - 1 Pause  Alarm Trigger by ignition 

continued 

Alarm in Valet mode 

 

When disarming, the siren sounds 4 sounds indicate that the alarm trigger. The LED board by the 

flashes will indicate the cause of the trigger. Place a label under the board LED codes indicating. 

 

Valet mode and Button Reset (Function No 1) 

Valet  Mode  is designed  to disable  the alarm system  when required,  such as when you  need to 

leave the vehicle in a parking lot, performing maintenance, etc.

 

For this mode it is necessary that the alarm system is disarmed, pass the ignition switch in the ON 

position, press for 3 seconds the reset button, to activate, the LED board will pass to constant on.

 

When  the alarm system  is  in  valet  mode  will be excluded  engine cuts (anti-hijack)  and  audible 

alarm 

system 

To exit valet mode pass  the  Switch ignition to ON press the reset button for 3 seconds, the LED 

board will turn off indicating the valet mode exit. 

 

Содержание G3000 Link













Отзывы: