Genius ColorPage-HR6A Scanner
15
Lamp Control
The scanner’s lamp may be turned ON and OFF manually in the Scanner Utility program. While
there, you can also set a timer to turn the lamp off after the scanner has been idle for a
designated amount of time.
To do this, click on the Windows START button and choose PROGRAMS, ColorPage-HR6A,
SCANNER UTILITY. In the window that opens, find the Lamp Control section shown below:
Click on the On/Off switch at the far right of the section to immediately turn the scanning lamp on
or off.
You may also set the default time for the lamp to automatically turn off after a scan by clicking the
up or down arrows next to the area that reads “minutes to turn off lamp.”
